Installing The Asterisk Appliance 50; Figure 3: Asterisk Appliance 50 Back View - Digium Asterisk Appliance 50 Administrator's Manual

Power
Supply
Craft
Port
Configuration
Reset Switch

Figure 3: Asterisk Appliance 50 Back View

Installing the Asterisk Appliance 50

Remove the Compact Flash cover plate and insert the Compact Flash
1.
card before connecting the power supply.
Caution.
The Compact Flash is not hot swappable. The Compact Flash
card should be inserted before powering on the unit. Likewise,
before removing the Compact Flash card it should be
unmounted (using the unmount command) and the Asterisk
Appliance 50 should be powered off.
Digium, Inc.
LAN
Ports
WAN
Port
Chapter 2: Unit Installation
Analog
Ports
Page 24