Idea TV-Mate User Manual page 5

TV / HDTV
" " Key on the remote contro unit
1. For TV, the TV-Mate default frequency is 480i output (or 576i (PAL) in Europe).
2. If a HDTV is used, use the "Home" key to get to the opening screen as Fig.1, remove all the
USB disk and Memory card, then press "TV / HDTV" button several times to scale up to
(The sequence: 480i->576p->576i->720p(HDTV)->480p->480i).
720p.
1) If you connect the Y/Pb/Pr cables onto your TV and find shown images (Fig. 3 or 4), your TV set
doesn't support 480p or higher resolution. Please replace it with the TV-Mate A/V cable, and
press "TV / HDTV" button as above sequence to get correct and clear images as Fig.1.
2) If you find shown image (Fig. 5), it means incorrect frequency match, i.e. 720p HDTV frequency
on the TV (it should be 480i or 576i), please press the "TV/HDTV" button several times to get
correct and clear images. If the problem remains, please refer to your TV/HDTV manual for
accurate setup information.
3)
. Only HDTV- ready television (1366*768 or 1920*1020) support the 720p mode.
TV/HDTV button sequence: 480i (
The frequency info will be displayed on the TV screen.
4) Some TV can't work with the "Progressive" Mode. If your TV shows nothing on the screen with
the 480p or 576p setup, please change the TV setup back to 480i, hook the A/V cable, and
press "TV / HDTV" button again to get correct and clear images as Fig.1.
Fig. 3
) 576p 576i
NTSC TV
Fig. 5
-4-
(Setup the TV resolution)
720p
(PAL TV) (HDTV)
www.friendtech.com
Fig. 4
480p 480i
Fig. 6