Part Identification; Getting Started - Idea TV-Mate User Manual

Part Identification:

DC-in
1
2 USB-Host port
Mini-USB charger port
3
4
Y (Component Video / Y )
5
Pb (Component Video / Pb )
6 Pr (Component Video / Pr )
7
Video / Audio Output
8 SD/SDHC/MMC/MS card slot

Getting Started:

(1) Plug the A/C power adapter into the DC-IN socket of the TV-Mate, and then connect the A/C
power adapter to the wall power socket.
(2) Pull out the battery isolation sheet in the battery compartment of the remote control unit.
(3) Connect the 3.5 mm video/audio output cable to your TV video and audio port. (480i for the
NTSC-TV, 576i for PAL-TV).
Note: Use the Remote Control Unit "TV/HDTV" key to setup the resolution 480i or 576i.
Refer to page. 4.【"TV/HDTV" button on the remote.】for more details.
(4) If you want to connect the HDTV, please connect the "Y/Pb/Pr" cable (buy it separately) to your
HDTV video (Y/Pb/Pr) output port. Please setup the 720P resolution for the HDTV. (page.4)
To connect the Power Adapter.
To connect to an USB thumb drive, USB card reader
To connect to USB device (for power charge only)
To connect to HDTV Y-input port.
To connect to HDTV Pb-input port.
To connect to HDTV Pr-input port.
To connect to external A/V port
Use the slot for SD, SDHC, MMC and MS media cards.
-2-
www.friendtech.com