Audio Volume Control; Video Adjustment And Setup; I Video Adjust Menu - Panasonic WV-LD1500 Operating Instructions Manual

AUDIO VOLUME CONTROL

By pressing the + or – button during picture display, you can adjust the audio volume level. While the + or – button is pressed,
the volume level is displayed on the screen.
–: Audio volume level goes down.
+: Audio volume level goes up.
Setting item
AUDIO

VIDEO ADJUSTMENT AND SETUP

I VIDEO ADJUST Menu

Setup of this monitor will be performed in the VIDEO
ADJUST menu.
Notes:
• The menu title display differs depending on the select-
ed input signal. Before adjustment, press the INPUT
SELECT button surely to select the input signal. (Refer
to p. 13.)
• If the power is shut down during setup, the setting val-
ues will not be saved.
1. Press the MENU button. The top menu will be dis-
played.
2. Move the cursor to VIDEO ADJUST by pressing the C
or D button. Then, press the MENU button.
14
This Manual: http://www.manuallib.com/file/2714277
Effect
+: Audio volume level goes up.
–: Audio volume level goes down.
V I D E O A D J U S T
S E T U P
E X I T
Setting value
0 to + 40
• While the VIDEO A, VIDEO B, or S-VIDEO input signal is
currently being selected, the following menu will be dis-
played.
V I D E O A D J U S T
B R I G H T N E S S
C O N T R A S T
S H A R P N E S S
C O L O R
T I N T
N O R M A L S E T T I N G S
E X I T
• While the PC input signal is currently being selected,
the following menu will be displayed.
V I D E O A D J U S T
B R I G H T N E S S
C O N T R A S T
N O R M A L S E T T I N G S
E X I T