REAR BRAKE AND AXLE, CONT.
9. Install rear brake cable on brake arm.
10. Install chain on drive sprocket and tighten
sprocket bolts to specification.
Sprocket Bolt Torque:
18 ft.lbs. (25 Nm)
11. Set the chain tension to specification by loosening
the lock nuts on the chain adjuster. Turn the
adjuster until the chain tension is set. Tighten the
adjuster nuts.
Chain Tension Specification:
.40-.80" (10-20 mm) slack
Chain Tensioner Nut Torque:
84 in.lbs. (10 Nm)
12. Tighten all bearing carrier bolts to specification.
Bearing Carrier Bolt Torque:
43 ft.lbs. (60 Nm)
13. Install the rear cover.
specification.
Rear Cover Bolt Torque:
84 in.lbs. (10Nm)
BODY / STEERING / SUSPENSION
Torque bolts to
Chain Adjuster
Carrier Bolts
Rear Cover
Carrier Bolts
4.13