ENGINE ASSEMBLY
5. Make sure oil pump area is clean. Install oil pump
and torque to specification.
gasket.
Oil Pump Bolt Torque:
43 in.lbs. (5 Nm)
6. Install stator. Torque bolts to specification.
Stator Mounting Bolt Torque:
84 in.lbs. (9.5 Nm)
7. Inspect flywheel key for damage.
necessary.
Install flywheel and torque to
specification.
Flywheel Nut Torque:
25 ft.lbs. (34 Nm)
8. Install driven clutch shaft components and shaft
assembly.
Install new stator
Replace if
ENGINE
2.19