Hoover HVBF 5182WWK Instruction Book page 20

Instructions for water dispenser disassembly and cleaning
I. Disassembly
1. Take out the water tank components
To pull out the water tank components in the direction of 45°of oblique upward by hands that
are closely attached on the two sides of the water tank components, when the lower parts of
water tank components are separated from the water valve components, the water tank
components can be taken out through horizontal movement (to the direction of user);
2. Take down the sealing ring of water tank
3. Disassembly of water valve components
Use the (screwdriver), and its tool edge shall be in alignment with and inserted in the vacancy
at the skirt border, which is bulged at the top of water valve components, then rotate the
screwdriver clockwise or anticlockwise, after the rotation, use the tool bit to open the water
valve and then pull out the water valve components in the direction of 45° of oblique upward
by hands.
15