Frame Status Error Messages - Meyer Sound Matrix3 LX-300 Hardware Reference Manual

Error Code
IE14
IE16
IE17
IE18
IE19
IE20
IE21
IE22
IE23
IE24
IE25
IE26
IE27
IE28
IE29
IE30
IE31
IE32
IE33
IE34
IE35
IE36
These errors are self-explanatory, and indicate a problem with the system software.

Frame Status Error Messages

Some errors are shown as a text message on the Frame Status display.
DMA0 DID NOT INTIALIZE PROPERLY. POWER CYCLE TO CORRECT
DMA1 DID NOT INTIALIZE PROPERLY. POWER CYCLE TO CORRECT
COBRANET DSP HAS STOPPED RESPONDING. POWER CYCLE TO CORRECT
MISSING BOOT ETHERTRACKS FILE. PLEASE SEND FILE
ETHERTRACKS FLASH FAILURE. REFLASH TO CORRECT
ETHERTRACKS DUALPORT FAILURE. POWER CYCLE TO CORRECT
ETHERTRACKS BOOT FAILURE. POWER CYCLE TO CORRECT
MISSING MAIN ETHERTRACKS FILE. PLEASE SEND FILE
ETHERTRACKS STARTUP FAILURE. POWER CYCLE TO CORRECT
CONFIGURATION FOR ETHERTRACKS MISSING. PLEASE SEND CONFIGURATION
COBRANET COMMUNICATION FAILURE. POWER CYCLE TO CORRECT
COBRANET INTERNAL FAILURE. POWER CYCLE TO CORRECT
These errors are non-fatal, but do require a firmware upload or that the LX-300 be rebooted.
44
Frame Status Error Messages
Could not load Flash program
Could not start BoxNet
Could not start SerialNet
Could not obtain TCP/IP Hostname
Could not obtain Midi serial socket
Could not start Midi Parser
Could not start Midi Subsystem Manager
Could not start Subsystem
Could not start Midi Xfer system
Could not start CASL subsystem
Could not start Externals subsystem
Could not erase System Flash
Could not erase User Flash
Could not autostart Cue List
Could not start RIF subsystem
Could not start CobraNet subsystem
Could not start DSP subsystem
Could not start Relay subsystem
Could not erase EtherTracks Flash
Could not start TCP/IP subsystem
Could not start SMPTE subsystem
Could not start CueStation 4 server
Explanation