Advertisement
Internal Setup
Daisy-chaining mixer
When more than eight microphones are used, the system could daisy-chain multiple CS-8
Automatic Mixers together through "Link In/Out" on the rear panel. Connect the #1 Mixer's "Link
Out" to the #2 Mixer's "Link In" with "D8P-1" extension cable. Repeat it to connect enough Mixers
for installation.
The last unit in the chain contains audio from all preceding mixers, and the combined output is
then taken from the last mixer in the chain. (Figure 2)
Notice 1: Because the "Lockout information" is passed through "Link In/Out", the whole chain
system has only one microphone will stay on.
Notice 2: One or more mixers could be changed to "BYPASS" mode without affecting automatic
functions in other mixers in the entire daisy-chain system.
Rack Mounting
Combined with "RM-12" rack mount kit, the CS-8 Automatic Mixer could be mounted in a 1U rack
space.
Mixer
D8P-1
D8P-1
D8P-1
LINE OUT
Master volume control is assigned to
the last unit in the whole installation.
LINE IN
CS-8
CS-8
CS-8
LAST UNIT
CS-8
Setting for each microphone input
8
Figure 2
Advertisement
