Unixware/Openunix 8 - Asus PCI Express x1 Network Interface PEB-G21 User Manual

Peb-g21 pci express x1 network interface card user guide

Table of Contents

Installing the UNIX Driver Software: UnixWare/OpenUnix 8

O v e r v i e w

This procedure describes the installation procedure for the UnixWare driver. The

driver is released as an installable package in datastream format.

Installing the Driver

Do the following to install the bcme package on the Unixware system:

pkgadd -d <install-path>.

Where <install-path> is the full path name of the installable package bcme-

<version>.pkg.

After the package is installed, use netcfg or scoadmin network to add the new

network adapter.

When prompted, select the Line Speed and then select Advanced Option for

Flow Control, MAC Address , and Jumbo MTU Size settings, if desired. The

settings for these properties are listed below:

Line Speed

•

Auto-Negotiate (default) (all speeds advertised)

A S U S P E B - G 2 1 U s e r G u i d e

Table of Contents