Asus PCI Express x1 Network Interface PEB-G21 User Manual page 18

When updating the adapter software on existing ASUS devices, the Advanced
Property settings may not be updated unless the existing ASUS device is removed
by following the instructions in the Removing the Driver Software section. You must
then perform a scan for hardware changes in the device manager, followed by
reinstalling the ASUS device with the current adapter software as described in the
Installing the Driver Software section. Prior to uninstalling the Broadcom device,
ensure to capture all Advanced Property settings because the properties will be lost.
1. Start your Windows 2000 system and log in. You must have Administrator
privileges to install the driver software.
When you boot up the Windows 2000 system after installing the adapter card,
a series of Found New Hardware Wizard windows are displayed.
2. In the Install Hardware Device Drivers window, click Search for a suitable driver
for my device (recommended), then click Next.
3. In the Locate Driver Files window, select the applicable search location check
boxes, then click Next.
4. When prompted, insert the media to be searched into your CD-ROM drive, type
the path to the driver, and select OK.
18
A S U S P E B - G 2 1 U s e r G u i d e A S U S P E B - G 2 1 U s e r G u i d e A S U S P E B - G 2 1 U s e r G u i d e
A S U S P E B - G 2 1 U s e r G u i d e A S U S P E B - G 2 1 U s e r G u i d e