Windows Nt ® Driver Software - Asus PCI Express x1 Network Interface PEB-G21 User Manual

W i n d o w s N T W i n d o w s N T W i n d o w s N T ® ® ® ® ® Driver Software Driver Software Driver Software
W i n d o w s N T W i n d o w s N T Driver Software Driver Software
Installing the Driver Software Installing the Driver Software Installing the Driver Software Installing the Driver Software Installing the Driver Software
• The ASUS PEB-G21 PCI Express x1 Network Interface Card must be physically
installed in your system prior to installing the driver software. See "Installing
the Hardware" for details.
• A network device driver must be installed before the Gigabit Ethernet Adapter
can be used with your Windows NT system. BACS2 Help files require Internet
Explorer 4.0 or later to work properly.
• We recommend using Internet Explorer 5.0 to view help files.
• Hot Plug installation is not supported on dual port devices with Windows NT4.
• We recommend using Internet Explorer 5.0 to view help files.
To install the adapter software for Windows NT:
1. Verify that the Windows NT system is upgraded with Service Pack 4 or later.
2. Start your Windows NT system and log in. You must have System
Administrator privileges to install the driver software.
20
A S U S P E B - G 2 1 U s e r G u i d e A S U S P E B - G 2 1 U s e r G u i d e A S U S P E B - G 2 1 U s e r G u i d e
A S U S P E B - G 2 1 U s e r G u i d e A S U S P E B - G 2 1 U s e r G u i d e