Device Settings - bq aquaris m5 User Manual

// Aquaris M5
Complete User Manual - English
Settings

Device settings

DISPLAY
Cast screen: You can use your smartphone to send an audio/video signal to a remote screen
(another smartphone, tablet, television, etc.) using the Wi-Fi network to display its screen on
both devices. The remote screen must be compatible with the Miracast/DLNA protocol. Follow
these steps to configure your Aquaris and duplicate your device´s screen:
1. Switch on your compatible TV and enable cast screen mode (the process will vary
depending on the manufacturer).
2. On your smartphone, go to Settings > Device > Display.
3. Scroll down the list and select Cast screen.
4. Select the screen that you want to send audio/video from your smartphone.
5. After a few seconds you will see your smartphone screen duplicated on the other
device in real time.
Key backlight: You can set the brightness of the buttons by enabling or disabling the
backlight, or it can also be enabled for only 8 seconds.
Show navbar: Enables you to add another navbar to be used if the buttons below the screen
are not responding.
Brightness level: Adjust the brightness of the screen.
Adaptive brightness: Optimise the brightness level to the
light available.
Wallpaper: Select an image or video to use as wallpaper. You
can choose between live wallpaper, system wallpaper or
photos from your Gallery or video images.
Sleep: Set the time delay before the screen automatically
switches off.
Screensaver: Enable or disable this option.
Font Size: Choose from four different font sizes.
When device is rotated: Enable or disable automatic
screen rotation when turn your smartphone sideways.
Double tap control: Enable or disable this option so you can
switch the display on or off by double tapping the screen.
38