Advertisement
Quick Links
Features: Operation
The ST4002 and ST4003 Desktop Docking Stations feature:
- Fast charging of the Omnii™ internal battery.
- Fast charging of the spare battery pack.
- A Host USB port to connect peripherals such as a printer, keyboard, etc.
- A Client USB port to connect the docking station to a PC.
The ST4003 Desktop Docking Station additionally provides:
- A DE9M serial port (unpowered).
- An RJ45 10Base-T Ethernet interface. Both these interfaces are compatible with the
USB to Ethernet/serial drivers included in Omnii™.
Features: Front
Release button
Spare battery well
Locking arm
Omnii™ compartment
LED indicator
Docking connector
8000203A.indd 1
Features: Back and Battery Charge Well
Docking connector
Omnii™ compartment
Battery connector
Spare battery charge well
Features: Rear Ports
ST4002
ST4003
DC In port
Host USB port
Client USB port
Host USB port
DE9M Serial port
Client USB port
RJ45 Ethernet port
GETTING STARTED
Choose a plug for the universal power adaptor. The
1
adaptor may already be fitted with the plug you need.
1. Press the button on the power adaptor to release the plug.
2. Slide the existing plug out of the adaptor.
.
3. Slide the desired plug into the adaptor until it clicks.
Connect the Docking Station to external power.
2
DC Input
3
Insert the hand-held to charge its battery.
Slide the hand-held computer
into the Docking Station until
it latches.
Note:
Use only the univer-
sal AC power supply
approved by Psion
Teklogix for use with
the Docking Station.
4
Insert the spare battery.
Place the battery contacts down to mate with the connector,
and pivot the battery into place in the battery charge well.
- During charge, the LED indicator on the
hand-held flashes GREEN.
- When finished charging, the indicator
displays solid GREEN.
- The LED indicator on the Docking Station
behaves the same when a spare battery
is being charged.
Allow the hand-held computer and the spare bat-
5
tery to charge for three hours before first use.
Note: Full battery performance is only reached after
the first few charge/discharge cycles.
0 - 40 °C
32 - 104 °F
3 h
Over
7/19/2010 4:44:47 PM
Advertisement
Related Manuals for Psion Teklogix ST4002
Summary of Contents for Psion Teklogix ST4002
- Page 1 Features: Back and Battery Charge Well GETTING STARTED Insert the hand-held to charge its battery. The ST4002 and ST4003 Desktop Docking Stations feature: Slide the hand-held computer Choose a plug for the universal power adaptor. The - Fast charging of the Omnii™ internal battery.
- Page 2 To connect the Docking Station to a host computer: The hand-held computer in the Docking Station acts as a USB Client. 1. Connect the smaller end of the USB cable to the Docking Station (ST4002 shown). USB Micro-B to Type A cable 2.