Advanced - Loopcomm LP-7316K User Manual

4.3.4.2 Advanced

Item Description
B/G Protection When protection is enabled in this mode, it protects 802.11b/g client
Mode transmissions.
Beacon Interval Beacons are the packets sending by Access point to synchronize the wireless
network. The beacon interval is the time interval between beacons sending by
this unit in AP or AP+WDS operation. The default and recommended beacon
interval is 100 milliseconds.
Data Beacon This is the Delivery Traffic Indication Map. It is used to alert the clients that
Rate(DTM) multicast and broadcast packets buffered at the AP will be transmitted
immediately after the transmission of this beacon frame. You can change the
value from 1 to 255. The AP will check the buffered data according to this
value. For example, selecting "1" means to check the buffered data at every
beacon.
Fragment The fragmentation threshold determines the size at which packets are
Threshold fragmented (sent as several pieces instead of as one block). Use a low setting in
areas where communication is poor or where there is a great deal of radio
interference. This function will help you to improve the network performance.
V3.0.0