Table of Contents
Advertisement
Problem
After installing
the battery into
the DVR, the
LED didn't blink
3 times.
After install-
ing the battery
and continuous
pressing the
push-button the
indicator blinks in
10-flash series.
1
Troubleshooting
Possible.cause
1. The battery
is discharged or
faulty.
2. The DVR did
not start.
Memory error
Possible.
remedy.for.the.
trouble
1. Replace the
battery.
2. Extract the
battery and install
it again after 30-
60 s.
Contact the
technical support
service.
Advertisement
Table of Contents
