D-Point 2 Pull-Up Menu - Vivitek D-Point 2 User Manual

6 D-Point 2 Pull-up Menu

After you run the D-Point 2 by double clicking D-Point 2 icon
D-Point 2 icon will be shown in the system tray.
Right button click D-Point 2 icon in windows menu bar, then pull up menu appears.
Label
Configuration
Alignment View
Auto Calibration
Manual Calibration
Pen Mode
Finger Touch Mode
Virtual Keyboard
Run i- Draw
About D-Point 2
Description
Only when you want to change mounting position of Projector,
to change language, click this menu and follow the step "5.
Configuration".
Same as " Alignment View" function of Configuration.
If the accuracy is not enough during when you use D-Point 2,
do "Auto Calibration" again.
If the accuracy is not acceptable or Auto Calibration fails, select
"Manual Calibration".
Mark when used with IR pens.
Mark when used with DT01 module (optional).
If keyboard input is needed, click on the "Virtual Keyboard" then
the keyboard will appear on the screen.
When you want to run "i- Draw", then click.
This menu provides D-Point 2 version information. Click this
menu, and then version information window will be appeared.
- 12 -
on the desktop,