Memory Restoring And Reset - Casio QV-70C Service Manual And Parts List

MEMORY ERROR
"Memory error" (#1 ~ #3) message appears on QV-70 camera, when an error is found in its flash memory. In this
case, the QV-70 is locked up and do not accept any operation except power on / off.
MEMORY ERROR #1
When the memory error #1 occures, press the + button to do the error reset. The following display will be appeared on
QV-70.
ERROR RESET
YES SHUTTER
NO CALL TECH
SUPPORT!
Then press the shutter button. The display should return to normal.
(Refer to owner´s manual for QV-70.)
MEMORY ERROR #2, #3
When the memory error #2 or #3 occures, do the memory restoring.
Notes: 1. When do the error reset or memory restoring, use the AC adaptor.
2. Never turn the power off, while doing the error reset or memory restoring.
MEMORY RESTORING
REQUIRED TOOL
Memory restoring software: Amed.exe
Cable for QV-Link
OPERATION
1. Connect the QV-70 to PC with the cable.
2. Execute the "AMED -PIR" command on MS-DOS, then the following message will be appeared on the PC.
QV series Automatic Memory Error Debugger ver 2.0
Camera type = QV-10A/QV-30
Searching management block ...
Found at bank 1FF
Saving management block as "mngblk.dat"

MEMORY RESTORING AND RESET

0090:532E
status --- OK
— 4 —