KEM KODIAK MARINE Operator's Manual page 15

Inspect the spark arrester for any obstructions (Bugs, leaves etc.,) clean or Replace as needed.
11. Check the exterior of the heat exchanger. Follow and fix any leaks before continuing.
12. Check the alternator belt for any extra play; adjust as necessary. Does not apply to all
engines.
13. Tighten all loose nuts and bolts. Check for any loose pieces and tighten as necessary.
14. Start and run the bilge blower for at least 10 minutes.
15. Replace the engine cover.
CAUTION: All water must be drained from the raw water side of the heat
exchanger when surrounding environment temperature is below 32°F/0°C.
15