Enter Program Mode; Recall Defaults - Metrologic MS951 Programming Manual

Recall Defaults

D

Enter Program Mode

**Ability to Enter Program
Mode After Any Scan
R 1 8
Enter Program Mode
Only on First Scan
R 1 9
Recall Defaults
If during programming of the scanner,
there is a need to return to the original
factory settings, scan the RECALL
DEFAULTS bar code. Any settings
selected during that session or a
previous session will be lost.
F 1
When this option is selected, pro-
gramming can be entered by scann-ing
the ENTER/EXIT PROGRAM MODE
bar code after power up or during
normal scanning operation.
When this option is selected, the
scanner will only enter program
mode after power-up. Scan the
ENTER/ EXIT PROGRAM MODE
bar code immediately after the scan-
ner first receives power. This option
prevents the scanner from accident-
ally entering program mode during
normal scanning operation.
Recall Defaults
D F 1
3