Revox Joy S118 User Manual page 20

network receiver
Time in cradle [On] / [Off]
The S208 Remote
control can display
the current time
[On], when it is in
the charging
cradle in standby
mode. The timeout
until the time is
shown, depends
Stand-by
on the (0 - 300s) setting. The
power consumption while the time is
being displayed
charging is happening (battery 100%
charged), is 0,8W.
There is no time display if charging (fast /
trickle charging) is done directly through
the USB socket.
Weekday

Weekday selection, which appears as an
abbreviation (Mo, Tu, We ...) in the status
bar at the bottom of the display. This is
also important for the receiver's alarm
clock function.
Brightness

The TFT colour display can be operated
at three different brightness settings,
low medium
/ /
automatic
mode. In this case, the
integrated brightness sensor (see S208
overview) measures
brightness and adjusts the background
lighting accordingly.
 The brighter the background lighting
selection, the shorter the battery life.
18
and while trickle
high
, as well as in
the ambient
Background colour

Five colours are available as background
Dark grey / Walnut / Blue / Red /
colour:
Moss green.
On the one hand, this gives
you the option of choosing a colour that
matches your personal preference but it
also makes it easier to differentiate
between them, if several remotes are
being used.
Hotkeys

Four hotkeys
Zone/Room that can have network
receivers or IR devices assigned to them
from the list of available devices.
Network receivers are integrated into
this list by being paired with the S208. IR
devices are integrated through the S208
EasyCreator PC program. You can now
assign these devices to the hotkeys in
the corresponding zones through the
hotkey menu. This function is also
S208 EasyCreator
available in the
program.
Configuration
are available per
PC