Microwave Drawer Disassembly; Test Procedures - Sharp KB-6524PS Service Manual

Hide thumbs Also See for KB-6524PS:

Operation manual (24 pages)

Installation tips (2 pages)

Operation manual (24 pages)

Table Of Contents

Table of Contents

KB-6524PS

KB-6524PK

KB-6524PW

WARNING: Follow all safety precautions as stated at the beginning of this Service

Manual before proceeding!

. Open the Drawer to access the (4) mounting screws holding the

unit on to the wall or cabinet opening. (Fig 1).

2. Close Drawer and carefully pull the unit out from opening and

unplug the power supply cord. Place unit on a secured surface

to work on.

3. Remove the (2) screws holding AC Cord Mounting

Angle. Lift the mounting angle (with AC Cord attached)

and unplug AC Cord from molex. (Fig 2).

4. Remove the (18) screws holding the Outer Case/Side Angles,

then remove outer Case. (Fig 2).

5. Remove the (10) screws holding the Back Plate.

KB6524P

Side Angle

KB6525P

NOTE: You now have access to all components of the Drawer.