An Accent Light Kit model LK2 is available for installation
in the top of the firebox. Providing the junction box has been
pre-wired with separate circuits as described in the "Wiring for a
dual switch/receptacle" section.
Follow the instructions provided with the LK2 Accent Light kit
for proper installation in the fireplace.
Keep the control compartment, logs and burner area surround-
ing the logs clean by vacuuming or brushing area at least twice
a year.
THE LOGS CAN GET VERY HOT - HANDLE ONLY WHEN
COOL.
Always turn off gas to the pilot before cleaning. For relighting,
refer to the lighting instructions plate located in the lower com-
partment near the gas valve.
24309-1-0908
LK2 ACCENT LIGHT ACCESSORY
MAINTENANCE
Never obstruct the flow of the combustion and ventilation air.
Keep the front of the firebox clear of all obstacles and materials.
Screen panels must be in position while fireplace is in operation.
Page 29