Locating A Specific Part Of A Disc - Sony MHC-V808 Operating Instructions Manual

Using the on-screen display
(continued)
• During menu playback of a VIDEO CD
with PBC functions
SCENE 1
1 Elapsed time of the scene
2 Scene number
• During stop mode (except for Program
Play)
CONTINUE
DNR NORMAL
DISC 3
DISC 1
DISC 2
DISC 3
1 Play mode
2 Advanced DNR status
3 "ACTIVE," "COMET," or no display
4 For discs that have not been played
5 For a VIDEO CD
6 Track numbers on the disc
7 For an audio CD
• During stop mode in Program Play
Display is the same as ON SCREEN 1.
ON SCREEN OFF
No display (except for special menus).
Notes
•Normally, leave the display mode set to either ON
SCREEN 1, 2, or 3. When you select ON SCREEN
OFF, you cannot check the operating status while
operating the CD player. In this case, check the
information on the front panel display.
•When you record video signals played back from
this system onto a video tape (etc.), be sure to
select ON SCREEN OFF. Otherwise, the display
information will also be recorded on the video
tape.
30
1
0.55
2
1
ALL DISCS STOP 2
NTSC
3
COMET
Audio 4
47.55
5
•••••••
Video
TRK 1-15
6
Audio 1- 8
TRK
7
Locating a specific
part of a disc
–– Special Menu
This player has 5 different search features.
Select the search feature you want from the
SPECIAL MENU.
The TV screen must be ON to use these
functions.
SELECT
CD ·
PREV –/
NEXT +
ON SCREEN
Numerical
buttons
>10
π
SPECIAL
MENU
PBC
OFF/ON