Installation Of Batteries; Connecting The Power - The Singing Machine SML343 BK/P Instruction Manual

SML343-ENG(2014).qxp_Layout 1 7/7/14 16:25 Page 3
CONNECTIONS

INSTALLATION OF BATTERIES

Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.

CONNECTING THE POWER

Insert the DC adapter into the DC jack. You can power the system from a standard AC outlet by using the
supplied Power Adapter (The adapter operates on AC 100V~240V /50Hz-60Hz).
CAUTIONS:
• The included AC adapter is for use with this unit only. Do not
use it with other equipment.
• When the adapter is plugged in, the equipment is not
completely disconnected from the main source of power that
runs from the outlet to the unit. This occurs even when the
power button on the unit is placed on the off position.
Disconnect the power plug from the wall outlet to ensure
that the equipment does not receive any power source.
DC OPERATION
1. Slide the battery door in the direction the arrows to reveal the
battery compartment. Insert eight (8) "C" size alkaline batteries
(not included) as indicated on the diagram.
2. Replace cover tightly before operating.
CAUTIONS:
• Replace all batteries at the same time.
• Do not mix old batteries with new batteries.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturer's
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
E - 3