Charging The Headphones - RBH Sound HP-1B User Manual

CHARGING THE HEADPHONES

Your headphones come with a built-in rechargeable battery. Prior to using the
headphones, it is recommended the battery be fully charged for the first use;
this may take up to two hours. The red LED light will display while charging,
when completely charged the blue LED light will be displayed.
When the power is low, the headphones emit prompt tones every five minutes
and the red LED flashes; at this time the battery should be recharged.
For best results, please use the included micro USB cable for charging the
headphones.
1. Plug in the micro USB charging cable into the headphones.
2. Plug the other side of USB charging cable into the USB port on a computer
or USB charging station. When the red LED light is ON it is charging. When
the blue LED light comes ON it has finished charging.
3. Allow about two hours for a complete charge.
NOTE: The battery is recyclable. Batteries (battery pack or batteries installed)
should not be exposed to excessive heat, such as direct sunlight or fire.
6