General Functions; Basic Button Operations - RBH Sound HP-1B User Manual

GENERAL FUNCTIONS

Operation
Power On
Power Off
Pairing
Standby
Incoming Call
Low Battery
Charging

BASIC BUTTON OPERATIONS

Power on: Press "multifunction" button for two seconds. Blue LED flashes
two times.
Power off: Press "multifunction" button for three seconds. Red LED turns
off after flashing two times.
Volume adjusts: Each press of the "volume up" or "volume down" buttons,
changes the volume level one level at a time. When volume reaches either
maximum or minimum levels a "ticking" sound occurs.
Play/Pause: Press the "multifunction" button to pause, press it again and
sound will resume playing.
Previous: In standby status, press the "volume down" button for two
seconds to return to the previous track.
Next: In standby status, press the "volume up" button for two seconds to
go to the next track.
Answer call: Press the "multifunction" button briefly to answer a phone call.
End call: Press the "multifunction" button briefly to end a phone call.
Transfer call: During the phone call conversation, press "volume up"
button for two seconds, call switches to mobile phone. Press "volume up"
button again for two seconds and call switches back to headphones.
Last number redial: In standby mode, press headphone "multifunction"
button twice to redial the last number.
LED Status
Blue LED flashes two times
Red LED flashes two times
Red LED and Blue LED flashes alternately
Blue LED flashes three times in five seconds
Blue LED flashes continuous
Red LED flashes two times every two seconds
Red LED keeps flashing during charging
Blue LED flashes once charging is finished
3