Table of Contents
Advertisement
ZONE
You c a n s e l e c t d i f f e r e n t r e m o t e
command codes to control up to four XTs
independently with the same wireless
remote control system. Program the
remote handset to the number 1-4 that
corresponds to the Zone switch number
on the XT.
Note the remote handset will not operate
the XT unless its zone number matches
the Zone switch setting. The factory
settings for the remote handset and the
unit's Zone switch are 1.
To set the remote zone code, press both
the zone key and the key 1~4 which
corresponds to the setting of the XT Zone
switch. These keys must be pressed
simultaneously for about 1.5 seconds.
0 1 2 3 4 5 6 7 8 9
The numbered keys perform several
functions when combined with PRESET,
DIRECT and CD buttons. See below:-
PRESET
W h e n t h i s b u t t o n i s p r e s s e d , the
numbered keys can be for direct access
to each stored preset station. Presets 1-9
are displayed as P01, P02, P03, and so
on. To select station presets 10-30, press
the tens place key first. For example, to
select 26, first press key 2, then press key
6.
DIRECT
W h e n t h i s b u t t o n i s p r e s s e d , the
numbered keys can select the broadcast
frequency of the station you wish to
receive. First press the DIRECT key, then
the numbered keys corresponding to the
station.
In USA: to receive FM 103.7, press
DIRECT, 1, 0, 3, 7, 0.
IN Europe: to receive 103.75, press the
DIRECT key, then press keys 1, 0, 3, 7, 5.
N o t e i f y o u e n t e r a n i n c o m p l e t e
frequency, such as 1, 0, 3, 7 which is
missing the final 0 or 5, there will be a
short pause while the XT fills in the
missing number and finds the station.
CD TUNER AUX PHONO
These four buttons select which input
signal (CD, TUNER, AUX and PHONO) is
fed to the inputs of AMC preamplifier or
receiver.
When
CD
is pressed, the numbered
keys (0-9 and 10) allow direct selection of
desired track.
VOLUME >
and
These two buttons are used for adjusting
the overall loudness level of the sound. It
has no effect on the level of the signals
fed to the TAPE OUT jacks for tape
recording.
PLAY/ PAUSE
For AMC CD players use, press this
button to toggle between PLAY and
PAUSE.
STOP
For AMC CD players use, to stop CD
while playing.
TRACK >
and
TRACK <
For AMC CD players use, to let you set
the desired track for listening.
9
VOLUME <
Advertisement
Table of Contents
