Checking The Faxlync Firmware - CONCORD FaxLync User Manual

CHECKING THE FAXLYNC FIRMWARE

1. Connect a laptop to the LAN port of the unit and then go to the unit's
web interface at (http://192.168.2.1)
2. Login with User: admin / Password: admin
3. To check the firmware version you would need to go to Advanced /
MP20X Firmware Upgrade. The current version should be 2.6.4_
p041_build_9
4. If the build version on your unit is not the version listed, enter this
URL in the box after "Check every 24 hours at URL, http://faxlync.
concordfax.com/storage/firmware/MP20x.rmt
5. Click Apply
6. Click Force Upgrade. After the applying the upgrade, the FaxLync
device will reboot.
7. Then go to Advanced / Restore Defaults, and answer Yes to the
question, "do you want to make these changes?"*
*Note: this takes 2 to 5 minutes to update with Concord servers.
FaxLync User Guide | concordfax.com | sales@concordfax.com | +1 (206)-441-3346
14