Package Contents; Product Features - Tripp Lite B140-002-DD Owner's Manual

Package Contents

• B140-002-DD Extender / Splitter Transmitter Unit
• External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
• Mounting Hardware
• Owner's Manual

Product Features

• Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two
sets of Dual Displays
• A B140-Series remote receiver is needed at each monitor
• For longer distances: Use a B140-1A0 or B140-1A0-WP active receiver to
extend a 1920 x 1080 @ 60Hz signal up to 150 ft. from the transmitter
(or a 1024 x 768 @ 60Hz signal up to 200 ft. from the transmitter)
• For shorter distances: Use a B140-1P0 or B140-1P0-WP passive receiver
to extend a 1920 x 1080 @ 60Hz signal up to 50 ft. from the transmitter
(or a 1024 x 768 @ 60Hz signal up to 100 ft. from the transmitter)
• Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series,
to achieve maximum distance and resolution
• Further expand the range and number of monitors by adding B140-110
remote repeater units
• Add up to three repeaters on each of the B140-002-DD channels, for a
total of 4 displays per channel (An active receiver should be the last unit in
a channel)
• A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. for each repeater
added into a channel (or up to 175 ft. for a 1024 x 768 @ 60Hz signal)
• DVI 1.0 compliant
• HDCP compatible
• Mounting hardware included that allows the unit to be wall-mounted,
rackmounted, or pole mounted
• Plug and play; no software or drivers required
• Compatible with all operating systems
• Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule
purchases
13-01-085-933287_revA.indd 2
2
1/30/2013 3:44:15 PM