Using This System; To Adjust The Dialog Effect Level - Panasonic SC-HTB770 Operating Instructions Manual

Using this system

Operations
Preparation
≥ Turn on the active subwoofer.
≥ Turn on the TV and/or connected device.
DIALOG LEVEL
INPUT
LINK MODE
SELECTOR
----
Press [Í] to turn on the main unit.
Select the source.
Press To select
[INPUT "TV"--------#"BD/DVD"--------#"AUX1"
SELECTOR]
^- "
[ ] " " (Bluetooth
≥ This remote control cannot be used to control the
operations of the connected devices.
∫ When " " is selected as the source
On the Bluetooth device:
®
Select this system as the output source of the
connected Bluetooth ® device and start the
playback.
∫ When "BD/DVD", "AUX1" or "AUX2"
is selected as the source
On the TV and the connected device:
Select the TV's input for this system and start the
playback on the connected device.
∫ When "AUX3" is selected as the
source
On the TV and the connected device:
Select the TV's input for the device connected to "AUX3"
terminal and start the playback on the connected device.
If this system does not operate as expected or sound is unusual, returning the settings to
the factory preset may solve the problem. (
* The sound mode indicators blink from left to right (i) or from right to left (s) while adjusting.
The indicators will not blink when it has reached the maximum or minimum.
≥ If there is sound coming out of the TV's speakers, reduce the volume of the TV to its minimum.
≥ If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the
volume to the middle (50) when the main unit is turned on (Volume limitation).
To turn this function off, refer to page 34.
SOUND
PAIRING
"(- "AUX3"(- "AUX2"(}
)
®
Adjust the volume and sound effect
level.
∫ To adjust the volume of this system
Press [i VOL j].
≥ Volume range: 0 to 100*

∫ To adjust the dialog effect level

This setting will change the level of the Clear-
mode dialog effect. (
1 Press [i DIALOG LEVEL j] to display the
current level.
2 While the level is displayed:
Press [i DIALOG LEVEL j] to adjust the
level.
Indication
∫ To adjust the subwoofer level
1 Press [i SUBWOOFER j] to display the
current level.
2 While the level is displayed:
Press [i SUBWOOFER j] to adjust the
level.
≥ The level indication pattern is the same as dialog effect
level.
∫ To mute the sound
Press [MUTE].
≥ While muting, the sound mode indicators blink
simultaneously.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled if the main unit is turned off.
34)
30)
Effect level
4 Highest
3
2
1 Lowest
RQT9849
29