When Placing The Speakers On A Table - Panasonic SC-HTB770 Operating Instructions Manual

When placing the speakers on a table

∏ 2 Front
Speakers
∏ 1 Metal
bracket
≥For a safety measure to prevent the speakers from falling, refer to page 23.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 and 2 of "Place the speakers
horizontally" (
Attach the leg stands.
With the speaker facing down, the speaker attached to the red connector cable is
Red connector:
to be placed on the left side.
With the speaker facing down, the speaker attached to the white connector cable
White connector:
is to be placed on the right side.
≥ Keep the screws out of reach of children to prevent swallowing.
A Screw (supplied)
≥ Tighten securely.
B Screw hole
18
RQT9849
Place the speakers using the leg stands
∏ 1 Centre speaker
∏ 2 Leg stands
11, 12).
Align the higher or lower holes with the projecting parts on
the speaker.
≥ By changing the position that the stand is attached to the
projecting parts, the height can be adjusted by 9 mm.
∏ 3 Speaker cables
WHITE: Left
RED: Right
GREEN: Centre
∏ 6 Screws
Red
C Right speaker connector
D Left speaker connector
White