Safety Information - Furman AC-210 A E Owner's Manual

LiFT (LINEAR FILTERING TECHNOLOGY)
Unfortunately, traditional AC power conditioners have been designed for
unrealistic laboratory conditions. Prior technologies, whether multiple-pole
or conventional series-mode filters, could actually harm audio and video
performance more than they help, due to the resonant peaking of their
antiquated, non-linear designs. Under certain conditions, these designs can
actually add more than 10 dB of noise to the incoming AC line! Worse still,
lost digital data, the need to reboot digital presets, or destruction of sensitive
digital converters are frequently caused by excessive voltage spikes and AC
noise contaminating the equipment ground. Furman's LiFT takes a different
approach, ensuring optimal performance through linear AC noise filtering with
no ground contamination.

SAFETY INFORMATION

To obtain best results from your Furman AC-210A E Power Conditioner, please
be sure to read this manual carefully before using.
WARNING
To reduce the risk of electrical shock, do not expose this equipment to rain or
moisture. Dangerous high voltages are present inside the enclosure. Do not
remove the covers. There are no user serviceable parts inside. Refer servicing
to qualified personnel only.
IMPORTANT SAFETY INSTRUCTIONS
1. Please read and observe all safety and operating instructions before
installing your unit. Retain these instructions for future reference.
2. Your unit should not be used near water – for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming
pool, etc.
3. Do not place your unit near heat sources such as radiators, heat registers,
stoves or other appliances that produce heat.
4. The unit should only be connected to a 230-240 VAC, 50Hz, 10 Amp
grounded electrical outlet. Do not defeat the ground or change polarization
of the power plug.
5. Route the power cord and other cables so that they are not likely to be
5