Table of Contents
Advertisement
BB-GT1540 Basic operation (Base unit)
Adjusting the speaker
volume
Ringer volume
BB-GT1540 Answering system (Base unit)
Auto answer on
Auto answer off
Recording your greeting
message (max. 2 minutes)
Listening to new messages
Erasing a message
Using the answering system
remotely
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Press {^} or {V} repeatedly while talking.
1
Press {IP/TEL} repeatedly until the display shows
the desired line (n or m).
2
Press {^} or {V} repeatedly to select the desired
volume.
L To turn the ringer off, press and hold {V} until the
unit beeps.
1
Press {IP/TEL} repeatedly until the display
shows the desired line(s) (n and/or m).
2
Press {ANSWER ON}.
Press {ANSWER ON}.
1
Press {IP/TEL} repeatedly until the display
shows the desired line(s) (n and/or m).
2
{GREETING REC}
3
Within 10 seconds, press {GREETING REC}
again.
4
Speak clearly about 20 cm (8 inches) away from
the MIC.
5
To stop recording, press {STOP}.
When {6} flashes on the center of navigator key,
press {6}.
Press {ERASE} during playback.
1
Dial your phone number from a touch tone
phone.
2
After the greeting message starts, enter your
remote code. (Default remote code is "111".)
L The unit plays back new messages.
L After playing back new messages, the voice
guidance starts.
3
Follow the voice guidance as necessary.
– 5 –
Advertisement
Table of Contents
