Troubleshooting - Beem Miracle Mop 10 in 1 User Manual

EN
The following table helps in localising and remedying minor faults:
Fault
The power indicator (8)
does not light up.
The automatic circuit
breaker in the electrical
distribution board trips.
No steam.
The UV lamp does not
function.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
BEEM - Elements of Lifestyle

Troubleshooting

Possible cause
Plug not inserted into
socket.
No mains power.
Power indicator defective.
Too many appliances con-
nected to the same power
circuit.
No fault detected.
Appliance not switched on.
Not enough water in the
tank.
No batteries inserted.
The batteries are flat.
Miracle Mop 10 in 1
Remedy
Insert plug.
Check the mains socket or auto-
matic circuit breaker.
Contact customer service.
Reduce the number of appli-
ances on the power circuit.
Contact customer service.
Switch on the appliance.
Fill the tank, see section Filling
the tank (page 21).
Insert batteries.
Replace the batteries.
27