Panasonic AW-UE70KP Operating Instructions Manual page 47

Network settings
1
Start the Easy IP Setup Software.
2
Click the [Search] button.
3
Click the MAC address/IPv4 address of the
camera to be set, and click the [Network
Settings] button.
Notes
● When a DHCP server is being used, the IP
address allocated to the unit can be checked by
clicking the [Search] button of the Easy IP Setup
Software.
● If the same IP address is used for any additional
cameras, the numbers of the additional cameras
will be displayed in the "IPv4 overlap" column of
the cameras concerned.
● When the [Access Camera] button is clicked, the
Live screen of the selected camera is displayed.
[When using Windows]
(continued)
4
Input the network items, and click the [Save]
button.
Notes
● When a DHCP server is being used, "DNS" of the
Easy IP Setup Software can be set to "Auto".
● After the [Save] button is clicked, it takes
about 1 minute for the settings in the unit to be
completed. If the AC adaptor or LAN cable is
disconnected before the settings are completed,
the settings will be canceled. In this case, repeat
the steps to establish the settings.
● When a firewall (including software) has been
introduced, enable access to all the UDP ports.
● When the Easy IP Setup Software is used for the
first time, the [Program Compatibility Assistant]
screen may appear after quitting the Easy IP Setup
Software.
Select [This program installed correctly] in the
[Program Compatibility Assistant] screen.
47