Advertisement
The LCD display is dim, or
displays Lo
Device doesn't come on when
you press the start button
The LCD displays
EEEE
The LCD displays
out2
Measure is not accurate or
LCD displays unSt
Dimensions
Net Weight
Display
Measurement Units
Measurement Range
Minimal Weight
Division
Accuracy
Working Environment
Storage Environment
Power Source
Auto-Off
When carrying out maintenance, please practice the following Do's and Don'ts.
DO use a soft cloth to wipe the dust.
•
DO use a wet soft cloth, dipped into water and wrung out to wipe dirt.
•
Then use a dry, soft cloth to dry the scale.
DON'T wash the device with water, or immerse it in water.
•
DON'T use propellant, abrasive or other chemicals to wipe the dirt, as this
•
can cause discolouration or malfunction.
DON'T disassemble the scale. If you have any problems, please contact
•
the Kogan.com customer support team.
Battery power is low
Battery is exhausted
Battery is not inserted
correctly
Weight overload
Prior to turning on scale, there
is something on the scale that
weighs over 1000g
The weight is unstable when
you turn on the scale
235 x 140 x 14mm (approximate)
Approximately 360g
Digital LCD
g/fl.oz/lb:oz/ml
5000g / 176.4 fl.oz / 11lb : 0.4oz / 5000ml
2g
1g / 0.1fl.oz / 0.1oz / 1ml
F.S*3%
+1d
0
0°C to 40°C
-20°C to 60°C
3V (1 x CR2032 battery)
Scale will turn off after 3 minutes if there is no operation.
5
Replace battery
Replace battery
Reinsert battery according to
polarity indications
Remove the weight from the
scale to protect the loadcells
Remove the weight from the
scale, wait until it displays
zero, then you can start
weighing
Keep the weight stable when
turning on the scale
Advertisement
