Table of Contents
Advertisement
1.
Press the Edit button.
2.
Press the Select button or Control Select (Ctrl Sel) key.
3.
Select the Control as described earlier in this guide.
4.
Press the Control Assign (Ctrl Asgn) key.
5.
Enter 145 using the number keys. This sets the button or the pedal to send a combined Bank Select/Program
Change message.
6.
Press the Data 1 key.
7.
Enter the Program Change number, for example, 42.
8.
Press the Data 2 key.
9.
Enter the Bank LSB number, for example, 8.
10. Press the Data 3 key.
11. Enter the Bank MSB number, for example, 32.
12. Press the Enter key.
Programming a Button or Sustain Pedal to Increment/Decrement a MIDI CC value
It is possible to configure a button to increase or decrease a value each time it is pressed. This is useful if you want to
step through values one by one each time a button is pressed. To configure a button to increment a MIDI CC
between a minimum and maximum value, assign the button to number 154.
The minimum and maximum values are set using the Data 2 and Data 3 parameters respectively.
This requires four values to be specified (values given are examples):
Key
Control Assign
Data 1 (example)
Data 2 (example)
Data 3 (example)
The following example configures a button to increment the release time of the currently active MIDI instrument sound
preset every time the button is pressed (you may have to push the button several times while playing notes to hear a
difference).
1.
Press the Edit button.
2.
Press the Select button or Control Select (Ctrl Sel) key.
3.
Select a button as described earlier in this guide.
4.
Press the Control Assign (Ctrl Asgn) key.
5.
Enter 154 using the number keys. This sets the button or the pedal to increment the MIDI CC value.
6.
Press the Data 1 key.
7.
Enter 72 using the number keys. This specifies the MIDI CC for which values will be incremented.
8.
Press the Data 2 key.
9.
Enter 0 using the number keys. This specifies the minimum value.
10. Press the Data 3 key.
11. Enter 127 using the number keys. This specifies the maximum value.
12. Press the Enter key.
To configure a button to decrement (decrease) a MIDI CC value, assign the button to number 153. The minimum and
maximum value (range) for each button is set using the Data 2 and Data 3 parameters respectively.
NOTE: Each button will only increment or decrement its own parameter value and this value is independent of any
other button. In other words, assigning one button to increment a parameter and another button to decrement the
same parameter will cause the first button to send values such as 1, 2, 3, etc., each time the button is pressed.
Pressing the second button will send values such as 127, 126, 125 (as opposed to starting to decrement where the
first button left off; for example, 2, 1, 0).
Parameter
Increment MIDI CC
MIDI CC number
Low limit
High limit
13
Value
154
72 (Release Time)
0
127
Hide quick links:
Advertisement
Table of Contents
