Connecting The Drive Cables - Asus DVD-R/RW Drive DVR-104 User Manual

Connecting the Drive Cables

1. Connect the power cable plug to the power connector on the rear
panel.
2. Connect the 40-pin IDE cable plug to the IDE connector, matching the
red pin stripe on the cable with Pin 1 on the connector.
3. If your computer has a sound card or an onboard audio feature,
connect an audio interface cable to the 4-pin analog audio connector
on the rear of the drive. Connect the other end of the audio cable to
the connector on the sound card or on the 4-pin CD connector on the
motherboard.
18
+DVR-104 (09-24).P65
All the cable plugs are slotted so that they fit in only one
orientation. If a plug does not fit in completely, try
reversing it. DO NOT use too much force when fitting the
cable plugs.
4-pin Audio Cable
Replace the computer cover according to your computer
manual.
18
Power Cable
IDE Cable
ASUS DVR-104 User's Manual
6/20/02, 3:13 PM