Sharp LC-45GD6U Service Manual page 15

7. Remove the Top and Bottom Shields.
7-1. Remove the 2 lock screws 7-1 , Shield (Top) and 2 nuts 7-2 .
7-2. Remove the 1 lock screw 7-3 1 rivet 7-4 . Detach the Shield (Bottom).
8. Remove the 2 lock screws 8 and detach the Main/Digital PWB Shield.
9. Remove the 4 lock screws 9 and detach the Wire Holder Cover Ass'y.
10.Remove the Fan Angle.
10-1. Remove the 2 lock screws 10-1 and detach the Upper Wire Angle Ass'y.
10-2. Remove the Connector (P4805) from the TOP LCD CONTROLLER PWB. Remove the 4 lock screws 10-2
and detach the Fan Angle.
11.Remove the 8 lock screws 11 and detach the Center Angle.
12.Remove the 6 lock screws 12 and detach the LCD PWB Shield.
13.Remove the 7 lock screws 13 and detach the Digital PWB Shield.
14.Remove the 2 lock screws 14 from the Top Cover. Remove the Connector (P154) from the Key PWB.
Top Cover
Upper Wire Angle Assíy
Fan Angle
11
14
10-2
P154
Key PWB
TOP LCD CONTROLLER PWB
P2203
P4805
15
Shield (Top)
7-2
7-1
7-2
Shield (Bottom)
10-1
Wire Holder Cover Assíy
LCD PWB Shield
12
Center
Angle
8
Main/Digital
PWB Shield
Digital PWB
Shield
13
LC-45GD6U
7-3
7-4
9