Jeep grand cherokee Owner's Manual page 593

Hide thumbs Also See for grand cherokee:

Table of Contents

NOTE: MOPAR® SAE 5W-30 engine oil approved to

FCA US Material Standard MS-6395 such as Pennzoil®,

Shell Helix® or equivalent may be used when SAE 5W-20

engine oil meeting MS-6395 is not available.

Engine Oil Viscosity — 5.7L Engine

MOPAR® SAE 5W-20 engine oil or equivalent such as

Pennzoil® or Shell Helix® is recommended for all oper-

ating temperatures. This engine oil improves low tem-

perature starting and vehicle fuel economy.

The engine oil filler cap also shows the recommended

engine oil viscosity for your engine. For information on

engine oil filler cap location, refer to "Engine Compart-

ment" in "Maintaining Your Vehicle" for further informa-

MAINTAINING YOUR VEHICLE 591

NOTE: Vehicles equipped with a 5.7L engine must use

SAE 5W-20 oil. Failure to do so may result in improper

operation of the Fuel Saver Technology. Refer to "Fuel

Saver Technology – If Equipped" in "Starting And Oper-

ating" for further information.

Lubricants that do not have both, the engine oil certifi-

cation mark and the correct SAE viscosity grade number

should not be used.

Synthetic Engine Oils

You may use synthetic engine oils provided the recom-

mended oil quality requirements are met, and the recom-

mended maintenance intervals for oil and filter changes

are followed.

Materials Added To Engine Oil

The manufacturer strongly recommends against the ad-

dition of any additives (other than leak detection dyes) to

Chapters

Table of Contents