How To Range Test The Dx5E - Spektrum DX5e User Manual

Hide thumbs Also See for DX5e:
Table of Contents

Advertisement

Available languages

Available languages

4. Pull and hold the trainer switch on the top of the
transmitter while turning on the power switch. Release
the trainer switch once the LEDs on the front of the
transmitter flash, and a series of tones are heard.
Within a few seconds the system should connect.
Once connected the LED on the receiver will go solid
indicating the system is connected.
Note: Continuing to hold the trainer switch during the
binding process will prevent preset failsafe positions
from being learned by the receiver.
5. Remove the bind plug from the BATT/BIND port on the
receiver before you power off the receiver and store it in
a convenient place.
6. After you've set up your model, it's important to rebind
the system so the true low throttle and neutral control
surface positions are programmed.
SPEKTRUM DX5e • RADIO USER'S GUIDE

HOW TO RANGE TEST THE DX5E

Before each flying session, and especially with a new
model, it is important to perform a range check. The DX5e
incorporates a range testing system which, when placed in
the RANGE CHECK mode with the trainer switch activated
and held, reduces the output power, allowing a range check.
RANGE TESTING THE DX5E
1. With the model restrained on the ground, stand 30
paces (approx. 90 feet/28 meters) away from the model.
Note: Prior to performing the range check ensure the
correct failsafe stick positions are established.
2. Face the model with the transmitter in your normal
flying position. Pull and hold the trainer switch while
toggling the HI/LO Rate Switch four times. The LEDs
will flash and the alarm will sound indicating the system
is in range check mode.
Note: The trainer switch must be held the entire time
during the range check process; releasing the trainer
switch will exit the range check mode.
Trainer Switch
3. You should have total control of the model with the
trainer switch pulled at 30 paces (90 feet/28 meters).
4. If control issues exist, call the Horizon Product
Support Team at 1 877 504 0233 or go to
horizonhobby.com to find a local Spektrum
distributor for service in your country.
HI/LO Rate Switch
30 paces (90 feet/28 meters)
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents