Remote Lock Mode - Denon DBP-1610 Service Manual

SETTING MENU:
Remote Lock Off Mode:
This mode receives an input signal from the
remote control unit or from the Remote In-Jack on
the rear panel.
Remote Lock On Mode:
This mode dose not receive an input signal from
the remote control unit or from the Remote In-Jack
on the rear panel.
Perform the setting using the following procedure.
1. Press [POWER ON] and [STOP] buttons on the
front panel simultaneously for over 3 seconds to
set "Remote Lock Mode" and display mode.
2. Press [STILL/PAUSE] button on the front panel to
set to "On" or "Off". When "Remote Lock On",
"Remote Lock On" will appear in the upper right
corner on the screen and appears on the VFD.
Fig. a VFD
When "Remote Lock Off", "Remote Lock Off" will
appear in the upper right corner on the screen and
appears on the VFD.
Fig. b VFD
a. If [STILL/PAUSE] button is not pressed for 2
seconds or any other button is pressed within
2 seconds, the unit will be released from

"Remote Lock Mode".

b. When initializing, set the Remote Lock Mode
"off".
REMOTE LOCK MODE
24
DBP-1610