Menu Operations - Hyundai DVBT231 User Manual

(14) Press <OK/Exit> button to start scan or exit. See Figure 6, 7.
Figure 6. Manual Scan edit Figure 7. Manual Scan finished

2.MENU OPERATIONS

Once the channel scan is finished and all the channels are stored into the database, you can start
to watch the digital terrestrial TV channel or listen to the radio broadcast, some typical operations
are given in this chapter.
2.1 MAIN MENU
Main Menu for operating a lot of functions.
(1) Press <Menu> button to enter Main Menu. See Figure 1.
(2) Press <Info> button to display the version information of STB.
2.2 SETUP
Set the system settings of STB. See Figure 1.
2.2.1 Installation
Set the receiving and playing program settings of STB. See Figure 2,3.
2.2.1.1 Antenna Setting
Set the antenna power on or off to supply +5V power to antenna or not.
Note: The default is OFF, set this option to ON only if this STB is connected to an active
antenna which amplifies the received RF signal, otherwise please set it to OFF.
2.2.1.2 Country Setting
Set the country for Auto Scan, Manual Scan and Time Zone.
Note: Change the Country Setting will automatically change the default
Time Zone and set the default Frequency and Bandwidth for Auto Scan.
2.2.1.3 OSD Language
Set the On Screen Display Language.
2.2.1.4 Audio Language
Set the audio language for watching program.
2.2.1.5 Subtitle Language
Set the language for displaying subtitle.
2.2.1.6 LCN
Set the Logical Channel Number to on or off.
Note: LCN is a number that uniquely identifies a logical channel, which is popular in some euro
pean countries such as England, France.
EN - 48