Hyundai DVBT231 User Manual page 47

EN
(7) Press <Up/Down> button to select OSD Language option.
(8) Press <Left/Right> button to set a language.
If there is no channel database in the STB, it will start at step(5) directly when booting.
Figure 1. Main Menu - SETUP Figure 2. SETUP - Installation
Figure 3. SETUP - Installation continued
1.2 How to receive the programs?
Scan the possible frequency and bandwidth to receive the programs. Press <RED> or <GREEN>
button to start Auto Scan or Manual Scan.
1.2.1 Auto Scan
Auto Scan will erase the database first, and scans default frequency and bandwidth by Country
Setting. Follow the steps (1) ~ (8) at section 1.1.
(9) Press <RED> button to be confirmed to clear the database.
(10) Press <OK> button to confirm clear action and start Auto Scan.
It costs time to do Auto Scan, user can press <Exit> button to exit at anytime. See Figure 4, 5.
Later if you want to scan again, you can follow above Quick Installation procedure.
Figure 4. Clear database message Figure 5. Auto Scan finished
1.2.2 Manual Scan
Manual Scan adds the scanning results into database, it doesn't erase the database. But the User
has to know the Frequency and Bandwidth for scanning. If the user scans the same Frequency
and Bandwidth more than once, the previous programs will be overwritten. Follow the steps (1) ~
(8) at section 1.1.
( 9 ) Press <GREEN> button to enter Manual Scan Page.
(10) Press <Up/Down> button to select Frequency option.
(11) Press <0~9> button to input the Frequency value.
(12) Press <Up/Down> button to select Bandwidth option.
(13) Press <Left/Right> button to set Bandwidth value.
EN - 47