Panasonic CS-RE9QKE Service Manual page 79

15.5.26 F98 (Input Over Current Detection)
Malfunction Decision Conditions
During operation of cooling and heating, when an input over-current (X value in Total Running Current Control) is
detected by checking the input current value being detected by current transformer (CT) with the compressor running.
Malfunction Caused

Over-current due to compressor failure.

Over-current due to defective outdoor unit PCB.

Over-current due to defective inverter main circuit electrolytic capacitor.

Over-current due to excessive refrigerant.
Troubleshooting
79