Advertisement
8. Connect the compatible receive balun to the VGA input of the video
destination, the audio input of the audio destination, and an IR or RS232
control destination.
9. Connect the 5 VDC power supply to the DIGI-VGASD-WP-S.
Remote Power Cabling Specifications
18 gauge cable max distance: 200 feet
24 gauge cable max distance: 43 feet
Minimum voltage required: 4.5 VDC
Maximum amperage required: 220 milliamps
10. Power-on all connecting video, audio, and control equipment.
11. Verify picture quality. If necessary, adjust the signal using the blue, green,
and red dials on the receive balun.
Warning! Do not use any IR receiver (eye) or IR emitter other than those
sold exclusively for the DIGI-VGASD series of products to prevent
damage to the balun. Using 12V-based IR components may permanently
damage the IR circuitry of the product and void the warranty.
Required IR Emitter: Intelix DIGI-VGASD-IREMT
Required IR Receiver: Intelix DIGI-VGASD-IREYE
Advertisement
