Specifications - Sanyo TLS-4960 Instruction Manual

NB4Q/NA, NB4Q/NA2 (TLS-4960/TLS-4072 GB) Wed. Oct., 30/2002

SPECIFICATIONS

General Specifications
Video head system
Audio recording
Tape speed
Specified video cassette tape
Recording/playback time (TLS-4960 only) 2, 12, 24, 48, 72, 96, 120, 168, 240, 360, 480, 720 and 960 hours (when
Recording/playback time (TLS-4072 only) 2, 12, 24, 48 and 72 hours (when using T-120 tape)
Fast forward/rewind time
Television system
Video
Recording method
Video input
Video output
Horizontal resolution
Audio
Input
Output
Connectors
Alarm (1 shot) input
Control input
Series input
Ext timer (alarm reset) input
Common
Warning output
Control output
Tape end output
Timer output
Switch output
Remote control input
English
Dual-azimuth 4-head rotating helical scanning system:
Dual azimuth 2-head for record and standard playback
Dual azimuth 4-head for forward picture search, reverse picture search
and still mode
In 2-, 12- and 24-hour modes (when using T-120 tape)
33.35 mm /sec (2-hour mode)
VHS 1/2 inch video cassette tape
using T-120 tape)
approximately 2 minutes (when using T-120 tape)
NTSC color TV system
Luminance signal: FM recording
Chrominance signal: Down-converted direct recording
1 V(p-p), BNC, 75 Ω, unbalanced
1 V(p-p), BNC, 75 Ω, unbalanced
Black & white mode 350 line or more
Color mode 300 line or more
–8 dBs, RCA pin jack, 27 kΩ, unbalanced
–8 dBs, RCA pin jack, 600 Ω, unbalanced
No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)
Key code (pulse signal) (Normally 5 V)
No voltage, make-contact switch input (Low input 1s or more, Normally 5 V)
No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)
0 V (GND)
Open collector Max. 500 mA (Active Low 0 V, Normally open)
Key code (pulse signal) (Normally 5 V)
Open collector Max. 50 mA (Active Low 0 V, Normally open)
DC 5 V, 5.7kΩ, (Low output)
Pulse signal (Normally 5 V)
3.5 mm mini jack
51