Table of Contents
Advertisement
NB4Q/NA, NB4Q/NA2 (TLS-4960/TLS-4072 GB) Wed. Oct., 30/2002
ALARM RECORDING
Alarm Search
To go to the beginning of a desired alarm recording.
1
Press the SEARCH button during stop mode.
ø "AL SEARCH 01" appears on screen.
Press the l (or j) button to set the desired alarm
2
number (01 to 99), then press the FF (or REW)
button.
ø The desired alarm is searched for and a still
image of the beginning of the alarm recording
appears on-screen.
NOTE:
œ The alarm number is relative to the actual tape
position. (Please refer to the illustration below.)
Playback
Alarm number 2
1
Alarm trigger input point
Rewind direction
Actual position
3
Press the PLAY button.
ø Playback starts.
NOTES:
œ If the end of the tape is reached during a search, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
œ This function does not operate when a warning
display appears on the digital display.
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1
Press the SEARCH button twice during stop mode.
ø "AL SCAN" will be displayed on screen.
2
Press the FF (or REW) button.
ø The unit will advance (or rewind) the tape at
ø To cancel the alarm scan mode, press the
3
While the desired recording is being played back,
press the PLAY button.
ø Playback starts and alarm scan mode is
1
2
NOTES:
œ If the end of the tape is reached during a scan, the
tape will rewind and stop. If the beginning of the tape
Fast-forward direction
is reached, it will stop.
œ This function does not operate when a warning
display appears on the digital display.
26
high speed and playback the first 5 seconds of
every alarm recording.
STOP button.
canceled.
English
Advertisement
Table of Contents
