Table of Contents
Advertisement
2.3.4
Configure BMC IP source DHCP
1.
Repeat the step 1-4 in the previous sub-section.
On reboot, the main menu appears.Select Configure BMC IP Source DHCP,
2.
and press <Enter> to enter the sub-menu.
3.
A confirmation message appears, asking if you want to configure the BMC IP
source static IP now. Press <Y>.
Are you sure you want to configure BMC IP Source DHCP now?
Yes or No [YN]?
4.
When the configuration is completed, the below screen appears.
Detect Motherboard
Detect KCS Interface
New BMC IP Source : DHCP
Press any key to continue ...
5.
Then you can get IP from DHCP server.
2-8
ASUS Server RS162-E4/RX4 System
FreeDOS command prompt
ESB2 ASF Firmware Update
ESB2 IPMI Firmware Update
ASMB3-SOL PLUS Firmware Update
Configure BMC IP Source Static IP
Configure BMC IP Source DHCP
-> (DSBF-DR/SAS)
Chapter 2: Installation
Advertisement
Table of Contents
